What is FireDeTec?
FireDeTec is an automatic system having an elastic red detection hose, which is self-activating and finishes the fire in the place at where it starts. Detection hose is made of polymer blended substances to work at its best. FireDeTec protects fire area not at the numbered points but at everyplace of where the hose is tiled. This system is provided with an alarm system or a system close switch box to maintain self-start. These features remove all risks.

Why is it this much effective?
Because it extinguishes a possible fire at its centre, meaning its first ignition point, since it is tiled at everywhere at where protection is needed.. Detection hose is not affected by wet, dirtiness and irregular air circulation. It makes detection job at any condition. Pressurized detection hose is placed in the protected area. The hose placed at the fire cause melts and explodes when it detects the fire. The extinguishing material is evacuated from the blasted place and extinguishes the fire when it is still in the form of a small flame. Alarm system adapted intentionally starts to work. System can be in many different sizes and lengths.

Direct System
In FireDeTec system, there are a fire extinguishing body containing extinguishing material and a detection hose. Detection hose, pressurized with nitrogen up to its very end points, explodes at the point where it detects the flame and evacuates extinguishing material from the body by acting as a nozzle. It minimizes the damage to be caused by the fire provided by its detection from a very small flame.

Direct system is used in places such as electrical, electrical panel inside, data system rooms, under tile cables, machine rooms of yachts, UPS rooms, telephone central panels, automobile motors, engine parts of armored vehicles, work machines etc…

FireDeTec automatic detection and extinguishing systems is approved and granted a certification by TSE.

Indirect Sistem
In this system, there are evacuation nozzles, collector and manual activation mechanism in addition to the direct system. Detection hose is pressurized with nitrogen gas and its pressure system is balanced with fire extinguisher body pressure. In the system, detection hose detects the flame and explodes and transfer extinguishing material to the evacuation nozzles at the point where it detects the flame. Both systems are equipped with a manometer to watch system pressure

Indirect system is used in places such as kitchen paddle boxes, rooms requiring protection, rooms having intensive flammable, bus engine parts etc…

FireDeTec automatic detection and extinguishing systems is approved and granted a certification by TSE.


FireDeTec Application In CNC Benches
FireDeTec Various Application